Two pure metallic sealings.When fipeing a fitting, two metallic seals are being crimped into the pipe surface.
Full bore design.Every fitting type provides full flow to the medium. Minimal pressure loss is guaranteed.
Visual installation check.The fitting itself indicates the correct installation of the connection.
Up to 3 inches
FIPE fittings for pipe dimensions from 12.0 to 88.9 mm are approved to 140 bar working pressure. A safety factor 4 guarantees enduring reliability. The redundant sealing system allows a leak-free pipe connection without any o-rings or gaskets.
|applicable for media||liquids or gases|
|working pressure||140 bar|
|Max. test pressure||250 bar|
|compatible pipe dimensions||12.0 – 88.9 mm | 1/4“ – 3“|
|MIN. | MAX. TEMPERATURE||-55°C | 300°C|
|pipe material||stainless steel or steel|
|pipe processing||welded or seamless pipes|
DNV GL Group
ISO 19921: Fire resistance test of pipeline components
Technical center for ships and naval vessels
|burst pressure||560 bar|
|gas tightness||70 bar|
|Vibration||10 Milionen cycles|
|Vacuum||170 mbar Absolut pressure|
|pull-out||140 bar with axial load of 1.6 – 40 kN|